Page 1 of 1

Transipack

Posted: Wed Nov 26, 2008 7:09 pm
by Mike Phillips
I will get a photocopy tomorrow and post it to you if you can let me have an address please.

Mike

Re: Transipack Test Cage PSU

Posted: Wed Nov 26, 2008 6:03 pm
by Lytham2
Mike Phillips wrote:I have been sorting out my workshop and have found an Operating Manual with circuit diagram for the Transipack Type 306/15 PSU. Do you still want a copy?

Mike Phillips
Hello Mike,

Love a Copy Please . . . let me know cost please, then I can reimburse you

Regards

John Ex Pentith out station

Transipack Test Cage PSU

Posted: Wed Nov 26, 2008 4:44 pm
by Mike Phillips
I have been sorting out my workshop and have found an Operating Manual with circuit diagram for the Transipack Type 306/15 PSU. Do you still want a copy?

Mike Phillips

Posted: Fri Jun 27, 2008 4:12 pm
by Lytham2
P.S.

Yes, Mine has the same marking too. but judging by the weight . . .. . . .
id have thought it capiable of a lot more than 15A !!
JB

Transipack

Posted: Fri Jun 27, 2008 4:10 pm
by Lytham2
Hello Steven

Thanks for that.

Yes, Id already seen that site and sort of ignored it!, but I've emailed that address anyway
Many Thanks
John

I've Got One as Well!

Posted: Fri Jun 27, 2008 2:06 pm
by Steven Cole
Hello John

I have asked a couple of people at Arqiva, but no luck so far. My unit is engraved "Test Cage Power Supply Type 306/15, made by Industrial Instruments Ltd, Bromley" I am aware that some of the ex-Weyhill Maintenance Unit people periodically look at the site, maybe one of them has a copy of the manual.

Did you get anywhere with the link I passed to you?

Steven....

Posted: Thu Jun 26, 2008 6:42 pm
by David Rumens
Hi John,

Yes you are correct the bench PSU used in the 1970's was the transipack. Before that we had a set-up not un-like a UPS were a large battery was used to supplied the power and its charge rate (using an integral mains charger) was regulated against the power demand. It was all housed in a large grey metal box with two meters on the front, I can't remember the maker. The battery vented into the workshop, which was normal practice in those days. No H & S then!

Regards
Dave
Ex - Cranbrook/Hannington/Weyhill.

TRANSIPACK TEST CAGE PSU

Posted: Wed Jun 25, 2008 11:54 pm
by Lytham2
Hello All,

Does anyone remember the PSU's we used for running gear while in the workshops?

I think it was a transipack test cage power supply.

I have one of these and am looking for the manual/digram for same.

can anyone help . . PLEASE!!

Regards All

John Ex Penrith Outstation