Programming of Burndept mobiles

Topics to this forum should be confined to discussion relating to the three maintenance Units located at Bishops Cleeve, Kippax and Weyhill.
Post Reply
User avatar
Dave King
Forum Member
Posts: 2
Joined: Tue Sep 08, 2009 3:44 pm
Location: Sussex

Programming of Burndept mobiles

Post by Dave King »

Well, since my last post, I have found a YAHOO ! group that has all the info on it:- http://groups.yahoo.com/group/Burndept-BE536BE544/join
so all I need to do now is get access to an eprom programmer !
User avatar
Dave King
Forum Member
Posts: 2
Joined: Tue Sep 08, 2009 3:44 pm
Location: Sussex

Programming of Burndept mobiles

Post by Dave King »

Hullo, since retiring, I have joined an Amateur radio group, and managed to find a BE544 on eBay, but of course it needs re-programming for the amateur 2 meter band, 144 to 146 MHz and although I have also managed to find an electronic copy of the maintenance manual online:-
http://myweb.tiscali.co.uk/g0tqn/links.htm It does not have any actual programming data in it, because that was done by attaching a Data Fill Unit and pressing it's button, which automatically programmed the radio! Knowing what to program into the proms is a difficult problem, and so I am wondering if anybody who worked at Kippax might know what data is required in the proms to produce the correct frequency outputs, -or has somebody already done it?
Dave King, ex Sussex.
Post Reply